...
Search
Close this search box.

Econo vs Maxi Panels: Which One Cuts Your Changeover Labour on a Tight Hire Cycle

Econo vs Maxi panels is the comparison a hire desk keeps having to make, and it is not a price question. It is a clock question: how many items does a crew lift, stand, clamp and stack to put 90 metres of boundary up on Monday and take it down on Friday?

Both product pages itemise the two numbers that set that clock: panel length and mass per panel. Almost nothing else on either sheet touches it, which makes the choice narrower than the catalogue suggests and the wrong answer expensive in labour rather than steel.

Key Takeaways

  • The Econo page lists 2400 × 2100 mm, a 32 mm frame at 1.3 mm wall, 3.0 mm wire and 13 kg per panel.
  • The maxi page lists 3300 × 2100 mm, the same 32 mm frame at 2 mm wall, 4 mm wire, and 22 kg or 30 kg.
  • Both carry the same 150 × 60 mm opening. Anti-climb language separates neither format; length and mass do.
  • On 90 m the arithmetic gives 38 Econo sets against 28 maxi sets — ten fewer of everything else.
  • The Econo foot is filled to 26.5-28 kg against a 13 kg panel, so a filled-foot fleet moves mostly feet.
  • The maxi page also offers 2100 × 3250 mm, so a quote reading only “maxi” may be 50 mm short in one dimension.

What Each Sheet Actually Itemises

Read the two spec blocks side by side before anything else. The Econo page gives a panel 2400 mm long by 2100 mm high, a frame at 32 mm outside diameter with 1.3 mm wall thickness, 3.0 mm wire in both directions, a 150 mm × 60 mm spacing, and 13 kg per panel. The maxi page gives 3300 mm by 2100 mm, the same 32 mm outside diameter at 2 mm wall, 4 mm × 4 mm wire, the same spacing, and two weights on one line: 22 kg / 30 kg.

Three things fall out of that.

  • The mesh is not the differentiator. Same opening on both sheets. Any security difference between the two formats here is wire diameter, not aperture.
  • The frame outside diameter is shared. Both sheets put it at 32 mm, which is why a mixed fleet asks its foot and clamp supplier whether one stock covers both formats. Confirm that before you plan on it. This site’s construction-grade 2400 × 2100 mm line sits elsewhere at 40 mm, so check which frame your quotation is written on.
  • The coating lines are not comparable as written. The Econo sheet quotes hot-dip at 42 microns and pre-galvanised at 14 microns; the maxi sheet quotes hot-dip at 42 microns and pre-galvanised as 200 g per square metre. Ask for one unit before comparing.

The fourth item is a trap. Below its spec block, the maxi page lists other similar sizes: 2100 × 3250, 1800 × 3300, 1800 × 3250 and 2100 × 3000 mm. Four of those five are shorter than the headline in at least one dimension. A purchase order that says “maxi” without a length is not a specification.

A galvanised welded mesh temporary fence panel standing on a holed flat steel base at a concrete site edge, with vegetation and a person's legs behind

Counting a Changeover in Items, Not Hours

Workers standing galvanised welded mesh temporary fence panels along a paved edge, with solid hoarding boards leaning against the line

Neither sheet publishes a minutes-per-panel figure, and a number invented here would be the first thing to break your planning. So count items instead. Divide 90 m by the published panel length and round up: 38 Econo panels, 28 maxi panels. The Econo sheet defines one set as one panel, one foot with concrete and one clamp with bolt and nut, so the panel count carries straight through to feet and clamps.

Item on a 90 m run Econo, 2400 mm Maxi, 3300 mm
Panels stood3828
Feet placed3828
Clamp sets3828
Panel mass494 kg616 kg or 840 kg
Filled-foot mass1,007-1,064 kg742-784 kg

The first three rows are the certain part. Ten fewer panels is ten fewer lifts, ten fewer foot placements and ten fewer clamp pairs to open, tighten and count back into the cage. The maxi format banks that saving on every move.

One caveat on the maxi column: that page publishes no foot or clamp figure, so its 28 feet, 28 clamp sets and 742-784 kg are the Econo sheet’s set definition and its 26.5-28 kg filled foot applied to 28 panels. Ask for the maxi equivalents.

The last two rows are still where the light-panel argument loses its force. The Econo sheet fills its own plastic foot with 30 MPa concrete and 10 mm chip to a finished 26.5-28 kg, against a 13 kg panel. Across a run, the feet carry the load. The saving only lands if the fleet empties or swaps feet between jobs — a question for your own desk, not the catalogue.

Bracing multiplies the same arithmetic. That sheet states each stay requires two clamps and two plastic feet, in 1.5 m or 1.8 m heights on 32 × 1.3 mm tube. Neither page gives a stay spacing; that is your own site detail. Whatever it is, add two feet and two clamps per stay to the counts above before you commit a crew to an afternoon.

Where Each Format Earns Its Keep

The Econo format pays when a boundary moves. Footpath strips that shift with a trade sequence, sites re-dressed weekly, gate returns opened several times a day, and narrow perimeters where a 3.3 m panel has nowhere to turn. Its own page frames this as a one-worker install at 13 kg. Read that claim as being about the panel, since the same sheet hands you a foot filled to 26.5-28 kg. How the light grade behaves against site conditions is worked through separately in the site’s Econo lightweight temporary fencing guide; this article stays on the movement count.

The maxi format pays when a boundary stays. The page positions it for commercial, industrial, demolition, compound and multi-unit work, where a perimeter held for weeks turns ten fewer sets into ten fewer movements each time it is touched. Fewer joints also means fewer clamp pairs to lose and fewer breaks to walk. It carries one line the Econo sheet does not: the panels can be easily repaired if damaged. Ask what that means in practice, and which element gets repaired, welded or swapped.

The costs run the other way. Whether 22 kg or 30 kg needs a second pair of hands is your site’s manual-handling rule rather than a figure on either sheet, and a quotation that does not name which weight ships has not told you what the crew carries. The Econo sheet says its moulded feet last three to five years; a fleet turning bases over weekly should ask whether that window assumes outdoor exposure or rotation, because those are different lives for a moulding.

Put the two plainly. Buy the Econo format for the movements it saves on a perimeter that will be re-dressed inside a fortnight. Buy the maxi for a fixed line held a season, where the same item count is paid once on the way in instead of every Friday.

Six Lines to Put in Writing

Everything that moves the clock, and everything either sheet leaves open, fits on one page of your purchase order.

Line to confirm Why it moves the clock Where the sheets stand
Panel length, in millimetres50 mm per panel is 1.4 m of boundary over 28 panels3300 mm headline, four similar sizes below it
Which maxi weight ships224 kg across one run, and a different lifting plan22 kg / 30 kg on one line, unpaired
Sets per container, each format550 sets at 2.4 m is 1,320 m of boundary per 40′ HCStated for Econo, not stated for maxi
Which lead time governsRe-order timing is a fleet-size decisionEcono page says 15-20 days for one 40′ HC after deposit; the company publishes 20-25 days for bulk production
Stay count and its hardwareTwo clamps and two feet per stay, on top of the runStay heights given, spacing not given on either sheet
Feet on hire rotationFilled feet are the mass you move and the item you inspect610 × 230 × 150 mm, 26.5-28 kg filled, 3-5 year claim

Add one question neither sheet answers in the same unit twice: clamp hole spacing. The Econo page lists 75, 80, 90 and 100 mm centres for a 4.0 mm wall clamp at 0.42 kg a set. Confirm which pitch ships with your frame.

Frequently Asked Questions

How many Econo panels versus maxi panels does a 90 m boundary need?

38 Econo panels at 2400 mm, or 28 maxi panels at 3300 mm — length divided and rounded up. The same count carries to feet and clamp sets, since the Econo sheet defines one set as one panel, one filled foot and one clamp.

Does the lighter Econo panel mean a lighter load to move?

Not necessarily. That sheet puts the panel at 13 kg and its own foot at 26.5-28 kg once filled with concrete. Feet dominate the mass per set, so the saving lands only if your fleet empties or rotates feet between sites.

Will the same feet and clamps fit both formats?

Both sheets give a 32 mm outside diameter frame, which is the starting point for asking whether one foot and clamp stock covers both formats — neither sheet says so. Confirm which clamp pitch is packed, 75, 80, 90 or 100 mm centres, and treat the 40 mm construction-grade line as a separate check.

Which coating figure should I write into my specification?

One unit, applied to both formats. The Econo sheet quotes a pre-galvanised finish at 14 microns; the maxi sheet quotes the same class of finish at 200 g per square metre. Ask for microns on both lines before comparing them.

Conclusion

Econo vs maxi panels is a bet on how often your boundary moves. The ten fewer sets per 90 m are certain. The kilograms you save by going lighter are not, because the foot the same catalogue fills with concrete outweighs the panel. Which figure governs your own changeover is knowable before you order; it simply is not on either product page.

Write the six lines into your next enquiry and ask for them back with the quotation. The company quotes within 24 hours and publishes a 7-day dispatch for stock items, so there is no reason to plan a fleet on numbers you have not pinned down.

Facebook
Twitter
LinkedIn
Pinterest
engineer cooperation two asian male female technician maintenance inspect relay robot system with tablet laptop control quality operate process work heavy industry 40 manufacturing factory

Talk To Our Expert

Connect with our specialists to discuss your needs and confidently start your project!

Picture of Frank Zhang

Frank Zhang

Hey, I'm Frank Zhang, the founder of DB Fencing, Family-run business, An expert of metal fence specialist.
In the past 15 years, we have helped 55 countries and 120+ Clients like construction, building, farm to protect their sites.
The purpose of this article is to share with the knowledge related to metal fence keep your home and family safe.

Categories

Recent Posts

Table Of Contents

We are at your disposal for any technical or commercial information

Table Of Contents

Picture of Frank Zhang

Frank Zhang

Hi, I’m Frank Zhang, the founder of DB Fencing, I’ve been running a factory in China that makes metal fences for 12 years now, and the purpose of this article is to share with you the knowledge related to metal fences from a Chinese supplier’s perspective.
Facebook
Twitter
LinkedIn

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email “info@metalfencetech.com”.

Your Email is necessary!!!